Precision V Rails – Linear and Rings

The Sliding Systems V range consists of Linear and Ring system, designed to work in harsh and dirty environments even at high speeds. Unlike regulating ball rails, the LGV & CR systems will not catastrophically fail, even when wear does occur. Maintenance/adjustability of the systems can be achieved by adjusting the Eccentric bearings to the required tolerance.

For Linear Rails there are 3 standard sizes available, LGV25XL, LGV44XL & LGV76XL. There are 2 rail precision grades: PG1 & PG3: PG1 is available in maximum single lengths of 1980mm for LGV25/LGV44 and 1700mm for LGV76. PG3 is available at a maximum single length of 5.5m. Longer lengths can be achieved with butted sets however this is only possible with PG1 grade rail.

For Rings there are 3 standard sizes available, CR25, CR44 and CR76; all surfaces including the mounting surface are ground. There is a wide range of diameters available to suit most applications, should it be required, all rings can be cut into sections to suit the customers design. Additionally, Double Edge Ring segments can be combined with Linear Double Edged Rails (PG1 grade only) to create Track Systems.