Sliding Systems are pleased to announce the appointment of Ross Roark as the new US based Techn...
4080.SHS - Linear Bush - Closed Flange
4080.SHS Sliding Systems PTFE Linear Bush - Closed Flange
The Sliding Systems self-lubrication PTFE linear bushes have excellent load capacity, resistance to high and low temperature (-240°C to +260°C) and are resistant to vibration. Their low coefficient of friction and self-lubricating design make them an ideal linear solution for a wide range of industries and applications, such as medical and pharmaceutical equipment, food and packaging equipment, fitness machines, etc
The self-lubricate characteristics of the Sliding Systems PTFE linear bushes, make them an ideal linear solution in applications and environments where additional application of lubrication is not possible or acceptable. However, if conditions permit, additional lubrication can reduce friction, by up to 30%. Which can extend the PTFE Bushes life considerably.
Sliding Systems Linear Bushes are designed to be used with our g6 Hardened Steel Shafts
Access all information by swiping the tabs below
Specification Details:
- Space Envelope Width: 42-92mm
- Height: 42-92mm
- Length: 42-100mm
- Maximum Load Capacity: 100,000N per bush
- Number of beams: N/A
- Extension Type: N/A
- Material: Anodized Aluminum Alloy Body with PTFE lining
- Vibration Resistance: 10
Profile:
Suitable For:
- INDUSTRIAL STORAGE - museum and workplace storage, display cases, pull out storage
- MACHINE BUILDS - Precision Positioning Systems, Handling Units
- SAFETY GUARDING - sliding gates extending protective systems
- SEATING – Sliding seats, seat extensions, arm rest adjustments
- SLIDING DOORS & WINDOWS – internal sliding door and gates
- SPECIAL VEHICLES - commercial and response, battery removal units, sliding hatches, sliding doors, sliding panels
The self-lubricate characteristics of the Sliding Systems PTFE linear bushes, make them an ideal linear solution in applications and environments where additional application of lubrication is not possible or acceptable. However, if conditions permit, additional lubrication can reduce friction, by up to 30%. Which can extend the PTFE Bushes life considerably.
The recommended lubrication is a Petroleum base oil or grease
Note: PTFE lubricates should NOT be use.
To achieve the best rate of wear and performance from a PTFE self-lubricating linear bearing, it is recommended the following shaft parameters are used:
Surface roughness: Ra 0.4
Hardness: 55+HRC
When designing a linear system using PTFE bushes, the Pressure Velocity (PV) factor is a key parameter to consider. PV can define the frictional performance between system's pressure and velocity. PTFE's mixture has an intrinsically limiting PV rating, while the system running under certain conditions. Put simply, the more load applied to system, the slower it must move to avoid exceeding the PV limit. The reverse is also true, more speed, less available load capacity.
Overloading and exceeding the Max speed will cause frictional heat and accelerated wear.
Max PV value: 0.7 N/mm ×m/s
Load capacity: 20 N/ mm (MPa)
Max speed: 1.5m/s
Working temperature: -50°C ~ +260°C
Friction Coefficient: 0.03~0.2
Sliding Systems Linear Bushes are designed to be used with our g6 Hardened Steel Shafts
* There are no CAD files available for this product, if you have any questions then please call us on 317-897-7000 between 9am-5pm GMT, or alternatively click here to contact us by email.
Downloads Access
To download the CAD files and specifications for this product you need to be logged in.
Data Sheet & main product information -
Industrial Storage
In-rack drawers and bespoke storage systems and assemblies
Museum Storage
The breadth of GSF's product range gives you an unparalled advantage when engineering solutions for unique storage systems that have to accomodate large irregular shaped artifacts or exhibits. Our experience with some of the more unusual high volume low load applications and environmentally sensitive storage conditions is available for you to call upon together with access to perhaps the widest range of sliding procuts in the world.
Correct selection and specification of the slide system will ensure maximisation of the space inside the storage or display unit while providing safe and secure access when required.
Workspace Storage
GSF offers a wide range of standardised products that are available direct from stock and which are most suitable for use in workspace desking, tool storage, assembly and operation stations. These products can be purchased free of restrictive minimum order quantities and charges.
Machine Building
The design and construction of specialised operational machinery and machine guards. The excellent range of Saibo hardened linear rails are designed to be economical whilst offering exceptional service life required in machine guarding.
General
Specification and design of linear movement systems incorporating linear rails and telescopic slides for use in machine guarding applications and the design and installation of manufacturing, cargo handling and other situation specific plant and machinery.
In such industrial applications, reliability and robustness are key requirements. When incorporated into automated plant, movement precision is also vital. The load capacities indicated on our high-end range represent the maximum load that can be carried whilst causing a slide deflection at full extension of no more than 1% of the slide's closed length. This is a much higher and more rigorous standard than is typically used by others for measuring slide load capacities, as a results our customers have come to rely on Sliding System's products for their durability and strength.
Our range also includes slides that operate with ultra-high precision based on innovative roller bearing technology, and which are self aligning.
Our design team has the ability to offer all or any of these components when working alongside your own engineering team.
Safety Guarding
Saibo compact linear rails are ideal for Safety Guarding systems such as sliding gates or extending safety protective systems.
To find out how we can help with safety measures using Saibo rails contact us info@slidingsystems.us
Seating Systems
Saibo compact linear rails are ideal for seating systems in all industries including vehicles, rail, aerospace – the rails and carriers are ideal for sliding seats, seat extensions, arm rest adjustments to name just a few applications.
.To find out how we can help with seating systems using Saibo rails contact us info@slidingsystems.us
Sliding Doors & Windows
Saibo compact linear rails are ideal for sliding door and window systems and can be manufactured at various sizes to accommodate most applications.
To find out how we can help with sliding door and window using Saibo rails contact us info@slidingsystems.us
Motor Manufacturing Plant
Telescopic Slide and Linear Rail components for lineside delivery and component handling systems
Automated Production Lines
Linear movement components and telescopic slides for use on repetition-intensive automated production lines. Components require a high resistance to localised wear patterns, uniform operating loads and designs capable of working at fast speeds with high accelerations.
Manually Operated
Linear rail and telescopic slide products for component delivery and handling at line-sideassembly stations.
The breadth of our product range gives you an unparalleled advantage when engineering solutions for delivery systems that have to accommodate large irregular shaped components or sub assemblies within space restricted line-side delivery stillages.
Correct selection and specification of the slide system will ensure maximisation of the space inside the delivery stillage and production efficiency while accommodating the natural variations of manual handling present in a time sensitive assembly environment.
4080.SHS Bush Closed Flange Inquiry
If you are unsure of which slide you require try using our custom enquiry page HERE
If you are unsure of which slide you require try using our custom enquiry page HERE
COMPANY
General Devices, Inc.
1410 S. Post Rd.
P.O. Box 39100
Indianapolis, IN 46239
Tel: 317-715-5500
FEEDBACK
We would like to hear from you with any feedback about our website or products.
Email us HERE
ABOUT US
General Devices Company Inc., is an Indianapolis, Indiana manufacturer and global partner of the GSF Group of Companies.
GSF Group designs, manufactures and supplies the widest range of telescopic slides and linear systems in the world. We are a global network of manufacturing sites, online purchase platform and dedicated aerospace division. We have domestically and globally sourced products of all kinds.
LATEST NEWS
© 2023 Sliding Systems US - All rights reserved | Website by Arise Media
4015.ADTS040 – ADTS-40